MAXCOOL Air Cleaner Foam Cooling For Air Conditioner Maxcool Foam (Eucalyptus) 500 ML.

Maxcool Foam

Feature Maxcool Foam

• Clean the coil panel to reduce the accumulation of stains
• It smells clean and fresh. Reduce the occurrence of musty smells from dirty air conditioners and dust
• Convenient and easy to use
• Non-CFC

Cleaning Procedure

1. Turn off the main power (turn the air conditioner breaker down)
2. Remove the air filter and clean it
3. Spray water all over the evaporator panel to remove dirt
4. Shake the Max Cool Foam canister for 10-20 seconds, remove the protective sheet. Spray Max Cool Foam all over the coil panel and leave it for 15 minutes to allow the foam to penetrate and remove dirt
5. Spray water to clean the coil panel. Dirty water will flow out through the sewer pipe
6. Wait for the evaporator panel to dry for about 1 hour and then assemble the filter. air and cover can be activated normally

Warning!

1. Do not eat
2. Be careful not to get it in your eyes. or touched the skin or inhaled
3. When using, wear rubber gloves and after handling or handling. Always wash rubber gloves and hands with soap and water
4. Do not dispose of the product or container into rivers, canals, public water sources
5. Pressurized container Do not drink, stab or set fire. After use, it may cause harm
6. Do not spray the product directly on electrical and electronic components, and do not spray near flames. because the product is flammable